CX/Gravel Tire Test: Rene Herse Snoqualmie Pass TC Endurance 44

This Rene Herse Snoqualmie Pass TC Endurance was tested for the Rene Herse Casing Comparison where we tested and compared all 4 available casings of the Snoqualmie Pass (Standard, Extralight, Endurance, Endurance Plus).

For more information about the Rene Herse Snoqualmie Pass we recommend the following articles on our site:

• Rene Herse Casing Comparison
• Snoqualmie Pass TC Test Results
• Snoqualmie Pass Extralight Test Results
• Snoqualmie Pass Endurance Test Results (this)
• Snoqualmie Pass Endurance Plus Test Results

Manufacturer Specifications

Manufacturer Specs
Brand	Rene Herse
Model	Snoqualmie Pass TC Endurance
Year	2022
Supplied By	Bought in store
New or Used	New
Mileage	0 km
Price Range	Very High
Buy At
Manufacturer part number	RF744TC-AX-CPGK
TPI	-
Compound	-
Bead	Folding
ETRTO	44-622
Specified Weight	425 grams
Max Air Pressure (psi)	75
Made In	Members Only
Available Sizes	44-622 (700x44c)

Rene Herse Snoqualmie Pass TC Endurance 44 Test Results

Size, Weight, and Thickness Measurements

Size, Weight, and Thickness Measurements
Specified Weight	425 grams
Measured Weight	418 grams
Measured Width Casing	40 mm (un-round)
Measured Width Tread	40 mm
Measured Height	37 mm (un-round)
Measured Knob Height Center	0.1 mm
Measured Knob Height Edge	0.2 mm
Measured Total Thickness Center (excluding knobs)	2.50 mm
Measured Total Thickness Sidewall	Members Only
All size measurements are taken at low air pressure on a 17.8 mm inner width rim.

Rolling Resistance Test Results

Rolling Resistance Test Results
Inner Tube	None (30 ml sealant) (current protocol)	Conti Cross28 (160 gr) (test protocol)
Measured Width	40 mm	40 mm
Rolling Resistance Real tire width in mm: 30-32 = 66 psi/4.6 bar 33-35 = 60 psi/4.1 bar 36-38 = 54 psi/3.7 bar 39-42 = 50 psi/3.4 bar 43-46 = 46 psi/3.2 bar 47-50 = 42 psi/2.9 barHigh Air Pressure (50 psi / 3.4 bar)	Members Only	Members Only
Rolling Resistance Real tire width in mm: 30-32 = 55 psi/3.8 bar 33-35 = 50 psi/3.4 bar 36-38 = 45 psi/3.1 bar 39-42 = 42 psi/2.9 bar 43-46 = 38 psi/2.6 bar 47-50 = 35 psi/2.4 barMedium Air Pressure (42 psi / 2.9 bar)	Members Only	Members Only
Rolling Resistance Real tire width in mm: 30-32 = 44 psi/3.0 bar 33-35 = 40 psi/2.8 bar 36-38 = 36 psi/2.6 bar 39-42 = 33 psi/2.3 bar 43-46 = 31 psi/2.1 bar 47-50 = 28 psi/1.9 barLow Air Pressure (33 psi / 2.3 bar)	19.6 Watts CRR: 0.00588	23.4 Watts CRR: 0.00701
Rolling Resistance Real tire width in mm: 30-32 = 33 psi/2.3 bar 33-35 = 30 psi/2.1 bar 36-38 = 27 psi/1.9 bar 39-42 = 25 psi/1.7 bar 43-46 = 23 psi/1.6 bar 47-50 = 21 psi/1.4 barExtra Low Air Pressure (25 psi / 1.7 bar)	23.6 Watts CRR: 0.00707	28.6 Watts CRR: 0.00857
The CX/Gravel section is a multi tire size section, air pressures have been adjusted to the measured casing width. All numbers are for a single tire at a speed of 29 km/h / 18 mph and a load of 42.5 kg / 94 lbs. Use the formula: RR (Watts) = CRR * speed (m/s) * load (N) to calculate rolling resistance at a given speed and load.

Puncture Resistance Test Results

Puncture Resistance Test Results (higher is better)
Total Puncture Score Tread	41 Points
Total Puncture Score Sidewall	Members Only
Tread Puncture Force Sharp Needle	Members Only
Tread Puncture Force Blunt Needle	Members Only
Tread Total Tire Thickness	2.50 mm
Sidewall Puncture Force Sharp Needle	Members Only
Sidewall Puncture Force Blunt Needle	Members Only
Sidewall Total Tire Thickness	Members Only

Hard Surface Static Grip Test Results

Static Grip Test Results
Wet Grip Average	58 Points
Wet Grip Center	Members Only
Wet Grip Edge	Members Only
Measured Knob Height Center	0.1 mm
Measured Knob Height Edge	0.2 mm
Grip in points = coefficient of friction * 100 CX/Gravel grip test rim width = 23.0 mm
Wet Grip Test and Off-Road Tires (info)

Conclusion

For our conclusion about the Rene Herse Snoqualmie Pass TC Endurance we refer you to the Rene Herse Casing Comparison article.

RATING: 4.0 / 5
TEST VERDICT: Recommended

Comments